连续系统仿真用采样保持器的分析与改进

Analysis and Improvement of the Sampled-data Holder for Continuous System Simulator

  • 摘要: 连续系统仿真时,必须人为地加入虚拟的采样保持器.本文推导了时域仿真误差与此采样保持器频率响应之间的数学关系,在此基础上提出了改进途径.根据这一思路组成了新型的混合补偿保持器.在选用最佳补偿参数后,与常用的精度量高的三角形保持器相比,在同样的计算步长下可把仿真精度提高一个数量级以上.

     

    Abstract: For continuous system simulation,it is necessary to add an imaginary artificialsampled-data-holder in this system.In this paper,a mathematical model which describes the relation between the simulation error in time-domain and the frequencyresponse of the holder is introduced.And the way to improve it is presented.A newhybrid compensator-holder has been built in accordence with the idea given above.Comparing with the triangular holder which has usually the highest simulation accuracy,it is possible to higher the simulation accuracy significantly by our newholder even in same computation step-size if the optimal compensator parameters aretaken.

     

/

返回文章
返回