石墨电极研磨机主振台微圆周振动的实时监测与控制

周宏志, 唐一平, 李乾, 李涤尘, 卢秉恒

周宏志, 唐一平, 李乾, 李涤尘, 卢秉恒. 石墨电极研磨机主振台微圆周振动的实时监测与控制[J]. 信息与控制, 2001, 30(5): 451-455.
引用本文: 周宏志, 唐一平, 李乾, 李涤尘, 卢秉恒. 石墨电极研磨机主振台微圆周振动的实时监测与控制[J]. 信息与控制, 2001, 30(5): 451-455.
ZHOU Hong-zhi, TANG Yi-ping, LI Qian, LI Di-chen, LU Bing-heng. A REAL-TIME MONITORING AND CONTROL METHOD FOR SMALL CIRCULAR VIBRATION ABOUT MAIN VIBRATION PLATFORM IN GRAPHITE ELECTRODE ABRADING MACHINE[J]. INFORMATION AND CONTROL, 2001, 30(5): 451-455.
Citation: ZHOU Hong-zhi, TANG Yi-ping, LI Qian, LI Di-chen, LU Bing-heng. A REAL-TIME MONITORING AND CONTROL METHOD FOR SMALL CIRCULAR VIBRATION ABOUT MAIN VIBRATION PLATFORM IN GRAPHITE ELECTRODE ABRADING MACHINE[J]. INFORMATION AND CONTROL, 2001, 30(5): 451-455.

石墨电极研磨机主振台微圆周振动的实时监测与控制

基金项目: 国家“九五”重点科技攻关项目资助(编号:96-A22-02-01)
详细信息
    作者简介:

    周宏志(1972- ),男,西安交通大学机械学院先进制造技术研究所博士研究生.研究领域为模具制造、数控加工和智能控制方向的研究.
    唐一平(1946- ),男,西安交通大学机械学院副教授.
    李乾(1976- ),男,西安交通大学先进制造技术研究所硕士研究生.研究领域为先进制造.

  • 中图分类号: TP13

A REAL-TIME MONITORING AND CONTROL METHOD FOR SMALL CIRCULAR VIBRATION ABOUT MAIN VIBRATION PLATFORM IN GRAPHITE ELECTRODE ABRADING MACHINE

  • 摘要: 针对石墨电极研磨机主振台微圆周振动轨迹实时监测与控制的要求,采用了双测头电涡流传感器分别检测主振台X、Y向的振动.传感器标定数据的神经网络拟合方法保证了检测的精度.通过对主振台相对于测头振动位移的实时测量,可以得到主振台的微圆周振动动态振幅,从而控制机床以保证研磨加工的顺利进行并为电火花加工钢模提供了平动头的振幅参数.
    Abstract: Pointing to the real-time monitoring and control of small-circular vibration of the main vibration platform in graphite electrode abrading machine, the vibration of the main vibration-platform in X, Y axis is-detected by a eddy transducer with two probes. A neural network fitting method about calibration data of the transducer may guarantee the detecting accuracy. The small circular vibration dynamic amplitude of the main vibration amplitude on platform can be obtained through real-time vibration displacement measurement between the main vibration-platform and probes, and hence the machine is controlled to ensure the abrading process to be conducted smoothly, which could provide amplitude parameters for translation moving head in EDM process.
  • [1] 卢秉恒,唐一平,李涤尘.激光快速成型制造的发展和应用.全国高等学校机床学研究会会议论文,1996,56~72
    [2] Zhou Hongzhi,Tang Yiping,Guo Jiusheng,Lu Bingheng.Abrading Technique Research on the Whole-bodied Graphite EDM Electrode Based on Rapid Prototyping Technology.ICAMT'99,126~129
    [3] C RYALL.Rapid EDM Electrodes:Linking Rapid Prototyping to High Volume Production.Rapid Prototyping Report,211~220,1996
    [4] 孙玉声.振动传感器.陕西:西安交通大学出版社,1991
计量
  • 文章访问数:  1103
  • HTML全文浏览量:  0
  • PDF下载量:  223
  • 被引次数: 0
出版历程
  • 收稿日期:  2000-11-26
  • 发布日期:  2001-10-19

目录

    /

    返回文章
    返回
    x