吴源达, 程平. 用逆推法建立二次型最优调节系统[J]. 信息与控制, 1984, 13(2): 20-24.
引用本文: 吴源达, 程平. 用逆推法建立二次型最优调节系统[J]. 信息与控制, 1984, 13(2): 20-24.
Wu Yu, a. A Recusive Algorithm for Synthesizing an Optimal Quadratic Control System[J]. INFORMATION AND CONTROL, 1984, 13(2): 20-24.
Citation: Wu Yu, a. A Recusive Algorithm for Synthesizing an Optimal Quadratic Control System[J]. INFORMATION AND CONTROL, 1984, 13(2): 20-24.

用逆推法建立二次型最优调节系统

A Recusive Algorithm for Synthesizing an Optimal Quadratic Control System

  • 摘要: 本文用根轨迹法根据预期极点位置确定反馈阵K,由K求出P的部分行向量,从而使非线性Riccati方程蜕化为线性方程式.然后,根据不大于nn+1)/2个线性方程式,验算对角阵Q的非负定性.如果Q≥0成立,则表明由K构成的控制律ut)=-Kx(t)是使二次型性能指标J为最小的最优控制律,相应的闭环系统是上述Q条件下的二次型最优系统,并且具有预期的极点配置.文中以SCR-D调速系统为例,说明本法计算简单,实验结果与理论相符.

     

    Abstract: In this paper the feed back matrix K is determined according to the desired polelocation by means of the root-locus method.From K we obtain a row of the matrix P,which makes the nonlinear Riccati equation a linear one.Then the property of the matrix Q is examined with no difficulty.If Q≥0,it means that the control law u(t)=-Kx(t) is an optimal one,which minimizes the value of the quadratic performance index J and so the related closed-loop system is an optimal quadraticone considering Q given above.And it gives a desired pole configuration.A SCR-Dsystem is given as an example,which shows that the calculation of this method is simple.

     

/

返回文章
返回