Citation: | XIA Bin, SU Yuxin. Nonlinear Output Feedback Trajectory Tracking Control for Harmonic Drive Systems[J]. INFORMATION AND CONTROL, 2012, 41(6): 730-734,740. DOI: 10.3724/SP.J.1219.2012.00730 |
[1] |
Musser C W.Strain wave gearing: USA, 2906143[P].1955.
|
[2] |
Zhu W H.Precision control of robots with harmonic drives[C]//Proceedings of the 2007 IEEE International Conference on Robotics and Automation.Piscataway, NJ, USA: IEEE, 2007: 3831-3836.
|
[3] |
Maiti R.A novel harmonic drive with pure involute tooth gear pair[J].Journal of Mechanical Design, 2004, 126(1): 178-182.
|
[4] |
Muhammed W.Analysis and control of kinematic error in harmonic gear drive mechanisms[D].Houston, USA: Rice University, 1996.
|
[5] |
Gandhi P S.Modeling and control of nonlinear transmission attributes in harmonic drive systems[D].Houston, USA: Rice University, 2001.
|
[6] |
Gandhi P S, Ghorbel F.High-speed precision tracking with harmonic drive systems using integral manifold control design[J].International Journal of Control, 2005, 78(2): 112-121.
|
[7] |
Zhu W H, Doyon M, Dupuis E.Adaptive control of harmonic drives[J].Journal of Dynamic Systems, Measurement, and Control, 2007, 129(2): 182-193.
|
[8] |
苏玉鑫, 郑春红.机器人系统全局渐近稳定非线性PD+轨迹跟踪控制[J].控制与决策, 2009, 24(11):1697-1701.Su Y X, Zheng C H.Nonlinear PD plus control for global asymptotictracking of robot manipulators[J].Control and Decision, 2009,24(11): 1697-1701.
|
[9] |
Gandhi P S, Ghorbel F.Closed-loop compensation of kinematicerror in harmonic drives for precision control applications[J].IEEETransactions on Control Systems Technology, 2002, 10(6): 759-768.
|
[10] |
苏玉鑫.非线性机器人系统控制理论[M].北京:科学出版社, 2008: 3-10.Su Y X.Control theory of nonlinear robotic systems[M].Beijing:Science Press, 2008: 3-10.
|
[11] |
Ghorbel F, Gandhi P S, Altpeter F.On the kinematic error inharmonic drive gears[J].Journal of Mechanical Design, 2001, 123(1):90-97.
|
[12] |
Tuttle T D, Seering W P.A nonlinear model of a harmonic drivegear transmission[J].IEEE Transactions on Robotics and Automation,1996, 12(3): 368-374.
|