| Citation: |
ZHANG Xinjia, DAI Guanzhong, LU Manhong. A DECONVOLUTION-BASED METHOD FOR DETECTING JUMP FAILURES IN A CONTROL SYSTEM[J]. INFORMATION AND CONTROL, 1991, 20(2): 13-18,50.
|
| [1] |
Willsky A S. A Survey of Scvcral Failure Detection Methods. Nov, 1976:601-611
|
| [2] |
Iscrman R. Process Fault Detection Based on Modelling and Estimation Methods-A Survey. Automatica, 1984;20:387-404
|
| [3] |
Park S, Himmclblau D M. Fault Detection and Diagnosis via Parameter Estimation in Lumped Dynamic Systems.Ind Eng Chcm Process Dcs, 1983;22:482
|
| [4] |
Willsky A S, Johcs H L. A Generalized Likelihood Ratio Approach to the Detection and Estimation of Jumps in Linear Systems. IEEE Trans Aut Control, 1976;AC-21:108
|
| [5] |
Sidcr M. Design ofAnalytical Failure Detection Systems Using Secondary Observers. NASA TM-84284, Aug, 1982
|
| [6] |
Clark R N. The Dedicated Observer Approach to Instrument Failure Detection. IEEE Conf on Control and Dccision, 1979:237-241
|
| [7] |
Chow E, Willsky A S. Analytical Redundancy and the Design of Robust Failure Detection Systems. IEEE Trans,1984;AC-29(7):603-614
|
| [8] |
Lancraft R E, Caylayan A K. A Fault Tolerant Approach to State Estimation and Detection in Nonlinear Systems. Proceedings of the 1985 Amcricsn Control Conf, 1985:799-804
|
| [9] |
Mcndel 3 M. Optimal Seismic Dcconvolution-An Estimation-Based Approach. ACADEMIC PRESS, 1983
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: